MCH 77 – Milled Earring Post Machine With Head
This automatic machine is for the production of earring pins of different sizes and shapes and earring post with head. This new option in the pins production is an often required to facilitate the welding of the pearl, beads of work piece to pin. The wire first passes through a wire straightener; it is then fed into the machine to be shaped into the desire model, stamped with the desired logo and cut to length. Pin’s length and size of pin’s head can be adjusted; shaping of pin’s tip, obtained by multiple rack of carbide shaped cutters, can be round or pointed. The pin can be with one or two grooves of a square or half round shape. The last step is the head forming by a stamp with the option of flat or a small rung in the center. A programmable logic controls the various steps. The touch screen control panel gives the possibility of programming production. The equipment includes Plexiglas hood and a vacuum gold-shaving collector for the recovery of gold lime-dust.
|Min and Max Pin Diameter||mm||0.6/1.5|
|Min and Max Pin Length||mm||8/25|
|Mains Voltage||V||220 1 ph|
|Width (including wire straightener)||mm||1700|
|Average Production Rate Milled Posts||pcs/h||2100-2400|
|Average Production Rate Milled Posts With Head||pcs/h||950-1000|
We reserve the right to implement modifications without notice
ENTER YOUR EMAIL AND DOWNLOAD THE TECHNICAL SHEET!