This is our new model of automatic machine for the production of earring pins of different sizes and shapes. Operating cycle is very simple: the wire is first fed in a wire straightener for surface hardening. It is then fed into the machine to be stamped with the desired logo and cut to length. An internal PLC controls the various working steps. Pin’s length can be easily adjusted; shape of pin is obtained by a multiple rack of carbide shaped blades. The head pin can be round or pointed. The pin can be produced with one or two grooves of a square or half round shape. The touch screen control panel gives the possibility of programming the production cycle. The equipment includes plexiglas hood and a vacuum gold-shaving collector for the recovery of gold lime-dust.
|Min and Max Pin Diameter||mm||0.7/1.5|
|Min and Max Pin Length||mm||7/50|
|Mains Voltage||V||400 3 ph|